I consider Gemma 4 31B (dense / no MoE), the new baseline for local models. It's obviously worse than the frontier models, but it feels less like a science experiment than any previous local model I’ve run, including GPT OSS 120B and Nemotron Super 120B.
On my M5 Max with 128 GB of RAM and the full 256K context window, I see RAM use spike to about 70 GB, with something like 14 GB of system overhead. A 64 GB Panther Lake machine with the full Arc B390, or a 48 GB Snapdragon X2 Elite machine, could probably run it with a 128K to 256K context window. Maybe you can squeeze it into 32GB (27.5GB usable) with a 32K context window?
Even last year, seeing this kinda performance on a mainstream-ish/plus configuration would have seemed like a pipe dream.
Gemma 4 IS good, I've literally had it get a thing right that Opus 4.7 missed, the edges are ragged and I'm reliably finding usecases where it's basically equivalent. Ultimately the metric is "what can I RELY on it to do". Opus definitely knows a lot more and can sometimes do much more complex tasks, but especially when you're good about feeding the context Gemma is amazing. The difference between the sets of things I trust the two models to do is surprisingly small. I've had some insanely good runs recently working on my personal tooling as well as random projects. The first local model that can reliably left to implement features in agentic mode on non-trivial projects.
This is a relatively complex piece of tooling built entirely by Gemma 4 inside OpenCode where I manually intervened maybe only 4 times over the course of a few hours.
Re-posting this from a buried comment for visibility because it's just so fucking impressive to me.
I went to the store to buy mixers and while I was out Gemma 4 31b got pretty far along with reverse engineering the bluetooth protocol of a desk thermometer I have. I forgot to turn on the web search tool, so it just went at it, writing more and more specific diagnostic logging/probing tools over the course of like 8 turns. It connected to the thermometer, scanned the characteristics and had made a dump of the bluetooth notification data. When I got back it was theorizing about how the data might be encoded in the bluetooth characteristics and it got into an infinite loop. (local models aren't perfect and i never said they were) I turned on the websearch tool and told it to "pick up the project where it left off", it read the directory, did a couple googles and had a working script to print temperature, humidity and battery state in like 3 turns. Reading back throught it's chain of thought I'm pretty sure it would have been able to get it eventually without googling.
idk, I thought I was a cool and smart engineer type for being able to do stuff like this, if my GPUs being able to do this more or less unsupervised isn't impressive I guess fuck me lol.
Built a basic authentication handler for this test just so it wouldn't be in the training data of either model. It had deliberately planted bugs. One was a hardcoded secret, another was a wrap-on-0xFFFFFFFF bug as a result of a malloc(length+1).
Qwen 3.6 found both, alongside two other issues I hadn't been considered, and the location of the magic value. GPT-5.4, though, missed the malloc issue (flagging memory exhaustion as the only risk), it missed a separate timing bug (it explicitly said the function was safe), and it hallucinated the location of the magic value. Qwen correctly identified the integer overflow. GPT-5.4 did not.
I then compared basic research between them using SearXNG for web search. For example, the current status of MTP in llama.cpp. Qwen 3.6 27B found the current PR, but flagged a related issue that shows the current implementation can be slower than just using a draft model right now. GPT-5.5 Thinking found the same PR, but didn't flag the downsides.
In a similar comparison, I asked both models how I should get started with ESPHome as a total beginner. ChatGPT suggested an ESP32-S3 and a BME280, which is... just not a good idea. It also talked about the ESP32-P4 not having Wi-Fi, and installing with HA or Docker. Meanwhile, Qwen3.6 27B said regular ESP32, DHT22, and mentioned HA, Docker, and pip as installation methods. While GPT was good, it was just throwing out jargon for a prompt that explicitly requested it for a beginner.
It kind of blew my mind that in all three of these, Qwen landed it better.
The small Qwen 3.6 models handle context a little better than Gemma 4, but Gemma 4 26B in particular has such small and efficient solutions which are really smart for its weight class. I was so impressed with its performance in our benchmark upon release that I wrote a blog post about it [0], although its position on the leaderboard later fell a bit as we ran it in more long context agentic coding environments.
i use smaller model gemma e2b for most of my editing and it works surprisingly well. Workflow is planning with sota models and execution via small models. If you plan properly dont leave ambiguity for smaller model it works well.
Out of curiosity have you tried other small models? The e2b for me was unusable. Llama3.2 3b was better and that thing is a year old and I rarely use it now too.
M4 Pro 64GB (14 CPU / 20 GPU), Gemma 4 31B Q4_K_M GGUF, LM Studio: time to first token 0.92s, 11.56 tokens/s.
Edit: For comparison with the other poster, same setup as above, but with Gemma 4 31B Instruct 8bit MLX (not sure if exactly the same model): time to first token 4.62s, 7.20 tokens/s; with a different prompt, 1.17s and 7.24 tokens/s.
Could you (or anyone with the same hardware) try antirez's ds4 and report how gracefully it degrades with only the 64GB RAM? Obviously it's going to be dog slow at best for any single inference flow, but can you meaningfully improve on that by running many sessions in parallel? (Ideally you'd need roughly on the order of model sparsity in order to get meaningful sharing of MoE weights, but whether that's genuinely achievable is anyone's guess!)
I could have used this article before I spent the weekend arriving to the same conclusion!
Same laptop, and my contrived test was having it fix 50 or so lint errors in a small vibe-coded C++ repo. I wanted it to be able to handle a bunch of small tasks without getting stuck too often.
GPT OSS 20B was usable but slow, and actually frequently made mistakes like adding or duplicating statements unnecessarily, listing things as fixed without editing the code, and so on.
Qwen 3.5 9B with Opencode was much faster and actually able to work through a majority of the lint warnings without getting stuck, even through compaction and it fixed every warning with a correct edit.
I tried 4bit MLX quants of Qwen 3.5 9B but it eventually would crash due to insufficient memory. I switched to GGUF, which I run with llama.cpp, and it runs without crashing.
It is absolutely not comparable to frontier models. It’s way slower and gets basic info wrong and really can’t handle non trivial tasks in one go. I asked it for an architecture summary of the project and it claimed use of a library that isn’t present anywhere in the repo. So YMMV, but it’s still nice to have and hopefully the local LLM story can get much better on modest hardware over time.
Very different from my experience, Gemma 31b just solved a physics problem Opus 4.7 gave up on. I definitely don't think they're equivalent in general, Opus for sure is way smarter and way more likely to get things right on the edge, but it's still quite likely to get things wrong too it doesn't make it that useful for a lot of stuff. Conversely there are so many things that you would use an LLM for that they will both reliably oneshot. Especially in agentic mode where you have ground truth feedback between turns the difference gets quite small for a lot of tasks.
That all being said I've spent hundreds (maybe thousands?) of hours on this stuff over the past few years so I don't see a lot of the rough edges. I really believe capability is there, Gemma 4 31B is a useful agent for all sorts of stuff, and anything you can reasonably expect an LLM to oneshot Qwen 3.6 35b MoE will handle at like 90tok/sec, absolutely fantastic for tasks that don't require a huge amount of precision.
It may surprise you but over thousands of hours I have actually gathered more than one sample.
EDIT: Here's another sample for ya. I went to the store to buy mixers and while I was out Gemma 4 31b got pretty far along with reverse engineering the bluetooth protocol of a desk thermometer I have. I forgot to turn on the web search tool, so it just went at it, writing more and more specific diagnostic logging/probing tools over the course of like 8 turns. It connected to the thermometer, scanned the characteristics and had made a dump of the bluetooth notification data. When I got back it was theorizing about how the data might be encoded in the bluetooth characteristics and it got into an infinite loop. (local models aren't perfect and i never said they were) I turned on the websearch tool and told it to "pick up the project where it left off", it read the directory, did a couple googles and had a working script to print temperature, humidity and battery state in like 3 turns. Reading back throught it's chain of thought I'm pretty sure it would have been able to get it eventually without googling.
idk, I thought I was a cool and smart engineer type for being able to do stuff like this, if my GPUs being able to do this more or less unsupervised isn't impressive I guess fuck me lol.
I have seen way too many people who are overly optimistic about local LLMs.
Having spent a decent amount of time playing with them on consumer nvidia GPUs, I understand well that they not going to be widely usable any time soon. Unfortunately not many people share that.
Not this. Let's reframe the problem. How many years behind do you think they are? By all accounts Gemma 4 is better than a frontier model from 3 years ago. Back then we were wowed by frontier models but when the local model reaches the same performance it's no good anymore, because you moved the target?
Relatively speaking local models might always be behind the curve compared to frontier ones. You can tell by the hardware needed to run each. But in absolute terms they're already past the performance threshold everyone praised in the past.
Right now in a lab somewhere there's a model that's probably better than anything else. There's a ChatGPT 5.6, an Opus 4.8. Knowing that do you suddenly feel a wave of disappointment at the current frontier models?
A local model is as good as a frontier model for responding on a signal threat with you which requieres basic tool calling.
A local model is as good as a frontier model of writing a joke.
A local model is as good as a frontier model at responding to an email.
Not sure what needs to be said often enough, no one without a clue would play around with local model setup and would compleltly ignore frontier models and their capabilities?!
At least in my experience, local models are very far away from models like Opus 4.7 or ChatGPT 5.5 in coding and problem solving areas.
I find them useful in basic research and learning and question asking tasks. Although at the same time, a Wikipedia page read or a few Google searches likely could accomplish the same and has been able to for decades.
I think you're doing it wrong. Use the frontier moddels for the research, planning etc and once you have a plan give it to a local model for implementation.
Im like 50% convinced that these people are paid by Apple to promote their products. Because the conversation is always just being able to execute models (even larger ones), on mac hardware with unified memory, but nobody ever mentions that inference speed is unusably slow.
You can have good local LLM performance through agents, but you need fast inference. Generally, 2x 3090 or at the minimum 2x3080s (you need 2 to speed up prefill processing to build KV Cache). You just ironically need to be good at prompt engineering, which has a lot of analogue in real world on being able to manage low skilled people in completing tasks.
Honestly surprised to hear that GPT OSS 20B runs slow on mac hardware. It's absolutely one of the fastest models I've run on local GPUs for its size, but only tried Nvidia cards.
Edit: TIL it is MoE and only has 3.6B active, explains a lot.
Yeah, I'm probably wrong there. GPT OSS 20B is certainly much faster than some other models I've tried. I actually gave GPT OSS 20B a few prompts just now and it seems to respond as fast or faster than Qwen 3.5 9B. But I needed many more prompts for GPT OSS 20B to complete my contrived task, so progress felt much slower.
I think it's useful to be realistic about what you can do with a local model, especially something as small as the 9B the author is using. A 9B model is around the level of Sonnet 3.6 - it can do autocomplete and small functions but it loses track trying to understand large problems.
But the are interesting and fun to play with! I do a LOT of work on local agent harnesses etc, mostly for fun.
My current project is a zero install agent: https://gemma-agent-explainer.nicklothian.com/ - Python, SQL and React all run completely in browser. Gemma E4B is recommended for the best experience!
This is under heavy development, needs Chrome for both HTML5 Filesystem API support and LiteRT (although most Chromium based browsers can be made to work with it)
It's different to most agents because it is zero install: the model runs in the browser using LiteRT/LiteLLM (which gives better performance than Transformers.js), and Filesystem API gives it optional sandbox access to a directory to read from.
It is self documenting - you can ask questions like "How is the system prompt used" in the live help pane and it has access to its own source code.
There's quite a lot there: press "Tour" to see it all.
Not to be nitpicky, but many of the 4-12b models are somewhere between GPT-3.5 and GPT-4o-mini. It's hard to find a good comparison though, because the benchmarks people score models against change so often. For reference, Sonnet 3.6 came out about a year after GPT 3.5
Don't worry about being nitpicky! I'm going to out-nitpick you....
Actually....
I write and publish my own benchmark for this stuff. It's an agentic SQL benchmark which isn't in the training data yet and I've found can separate frontier models from close-followers (the only models to get 100% are Opus 4.6 and GPT 5.5).
Critics are (rightly) pointing to the fact that these models are not on par with SOTA for complex coding tasks. But many seems to forget that a large part of white collar office work is Excel crushing, file moving, translating dry legal documents, e-mail drafting, PPT drudgery, etc. These are absolutely doable with 30-35b+ models with the added benefit of keeping company data private.
I think the conclusion is flawed here? Sure qwen3.5 9b is nowhere near the sota models. It's 9b and was made a year ago? Everyone taking about local models is pumped about the models released in April this year. Qwen 3.6 27b and qwen 35b a3b if you have a sad GPU. Those are comparable to sota models, seriously.
Yes... I mean organisations have to adapt to this new working scheme. First they need new processes (maybe borrowed from SW development) that enables them to triage work products on a risk/reward scale. For example my wife works on medical device tenders. It is obligatory to translate every frikkin Word document to our native language which in the end noone will read. Do we use LLMs to do the translation? Hell yeah. For a critical legal document? Eeee. Also I think enablers like speical harnesses shall be developed/improved by keeping these folks in mind. For example to build hooks into the harness that forces the LLM to test/review/sample its output. So yes it's a complex topic, but my point was rather that the inherent capabilities of medium-large-ish open LLMs are sufficient for let's say 70-80% of such office work, and it's a huge market.
Running LLMs local is fun and powerful but if you want to get work done... it is a big headache. You have to pre-plan and plan, and make specs, etc... The big OpenAI, Claude models just get you with just a few sentences..
Yup, especially when for a lot of us, the price of the frontier subscription has become a cost of doing business over the last 6 months.
If you're already doing big boy stuff with big boy models, then... just carry on trucking!
Only place I'd differ is for vision/OCR tasks. Small/medium open weights models are as good as SoTa, and token prices for prefill are kinda very not worth it for larger batch tasks.
Other thing that people forget is, if you want to have even a smallish LLM as a reliable personal service, you've got to carve out 16-24 of (V)RAM and leave it permanently running.
I am running qwen 3.6 9b quantized model on my m4 pro 48gb and it is barely useful to do some basic pi.dev/cc driven development. I think 128gb desktops are the sweet setup to actually get meaningful work done. However, getting your hands on one of these machines is difficult at the moment.
As much fun as it is to run these things locally don’t forget that your time is not free. I am slowly migrating my use cases to openrouter and run the largest qwen model for < $2-3/day with serious use for personal projects.
Was the choice of such a small model driven by a desire for high tok/sec? I ask because an m4 pro 48gb machine can run larger models (if model intelligence is the thing that would make it more useful).
I'm using the 30b MOE model on same spec with 65k tokens as a sub agent with tooling and it absolutely writes decent code. The dense 9b I agree wasn't great.
Thanks for saying this. There's so much nonsense out there online about local models being better than Opus 4.7 and the like. It's just not true for regular users.
I have a brand new M5 MacBook Pro - top end with all the specs and I've tried local models and they're barely functional.
What models and quantizations have you been trying? I've had great success with the larger Qwen 3.x models at 6-bit levels. Using 6 bit quantization is really the bare minimum to give local models a fair shot at agentic flows. Once you start pushing below that the models become more "dumb" from the limited bit space.
Cloud has tremendous value for speed, plug and play, and performance. You need to decide how those compete with the benefits of local - both today, and a year from now, e.g.
Good enough. It gets 60-70% of the work I need done for a lot less $ (keep in mind I am using these for personal projects that doesn’t generate revenue). If I was using it with the hopes of making money I think I would just use Codex at this point.
I got qwen3.6:27B running on my 4090 (24GB) with ~128K context leveraging some of the recent turboquant/rotorquant memory optimizations for activations. Highly suggest going up to that. the q4_xl+rotorquant combo is pretty good.
Thanks for sharing. I made a post earlier on bluesky describing my random setup on 32gb M2 studio. I'd love feedback. I'm a monkey and if I don't see I can't do.
I'd rather spend thousands dollars on a Mac than subscribing API. The local model allows me to do my work any time and anywhere, without worrying about privacy leak.
Recent models (Qwen 3.6 and Gemma) can really do coding locally. Feels like SOTA from maybe a year ago? But you would want about 32-40GB total memory. 24GB is just a bit short of that. A gaming PC with 16GB graphics card and 32GB RAM brings you very close to a usable coding system.
I would recommend to start withQwen 3.6 35B at maybe Q5, it should be fast in that setup. For intelligence Qwen 3.7 27b, is smarter but will run much more slow. Others also mention gemma 4, which might be worth a try.
Vibe coders out here thinking all software development is solved by because they made an (ugly and unoriginal) dashboard for their SaaS clone and their single column with 3x3 feature card landing page thats identical to every other vibe coders "startup"
For those who want a GUI, LM Studio does this too (with llama.cpp as the backend I think). I'm getting great (albeit slow) results with Qwen3.6-35B MoE on 8GB GPU RAM, 40GB system RAM.
Still trying to understand if a Macbook Pro M5 Max with 128GB is likely going to be able to run coding models well enough that I can cancel my Codex, or even go down to the $20/month plan.
A 128GiB MacBook Pro in Canada is what, north of CAD $11k after tax? That’s around USD $7k. At $20/month for a cloud AI subscription, you’re looking at almost 30 years of service for the same money.
How long do people realistically expect a laptop to stay competitive with SOTA local models? Especially in a space where model sizes, context windows, and inference requirements keep moving every year.
And even if the hardware lasts, the local experience usually doesn’t. A heavily quantized local model running at tolerable speeds on consumer hardware is still nowhere near frontier hosted models in reasoning, coding, multimodal capability, tool use, or reliability.
The economics just don’t make sense to me unless you specifically need offline inference, privacy guarantees, or low latency for a niche workflow. Otherwise you’re tying up $10k upfront to run an approximation of what you can already access through a subscription that continuously improves over time.
You could literally put the difference into index funds and probably cover the subscription indefinitely from the returns alone, even accounting for gradual price increases.
You can buy a used GPU for under 400 dollars if you already have a desktop and run qwen 3.6 a3b and for a majority of frontier tasks get by just fine. Why do you need to spend 10k on a laptop, we are swimming in ewaste.
But what if you were going to buy a laptop anyway? Obviously you can't do anything with less than 64 GBytes these days, so the question is just whether you go for the jump to 128.
In the UK, it's currently an extra £800 to get a 128 GB vs the 64 GB equivalent. So that's more like 3 years of Claude - I think? - assuming current prices stay the same.
Or: you might just feel like £800 isn't an unjustifiable amount of money (one way or another), and tick the box, on the basis that it might just work out. As the saying goes, in for 459,900 pennies, in for £5,399...
I rebuilt the entire fastcomments moderation UI 2yrs ago with webstorm on my 16gb thinkpad. 64gb is nice but not needed. I wonder if every dev didn't use an M4 Pro if software wouldn't be so resource hungry...
You are assuming I'd only get it for that. That would probably just be the straw that broke the camels back, but I'm already thinking about a purchase even if that doesn't work out.
Have been using Qwen 3.6 27b recently along with various other models the last month and it is very capable for writing code at a level I haven't need to use a subscription for 95% of what I throw at it. Been using it to write extensions for Pi to expand tool kit without much fuss as one example. Is it as fast or SOTA? No, but you can't ignore how functional it is on hardware you own. Where it can begin to struggle is giving too open ended prompts or investigating complex technical issues. At that level its knowledge is not high enough to solve those problems on its own.
Having an M3 with 36 GByte I was under the assumption, that I can utilize like Qwen and similar models. It's quite easy to set up, you can use pi or hermes for CLI access, or "Continue" to use it in VS Code. You can choose between omlx, Ollama and even more to run the model itself. It's no rocket science, but the results are also not satisfying.
I use it occassionally for very easy tasks, fix typos or update meta data in blog posts. So yeah, it improves productivity. But coding-wise it's far away from Codex, Claude et al.
Beyond the models getting better; there are still huge gains available in the inference engine side with new tricks like Dflash, MRT, turboquant - for some usecases these can multiply the speeds. There are even some model specific optimized kernels like for DeepSeek 4 flash that seem wild.
Makes me feel we are nowhere near the optimum yet.
I'd pick a much more open system with more capabilities for a little bit more money, e.g. a Jetson Orin 64GB (unified memory). Runs Linux out of the box.
What kinda harness do people use with these local models? I am quite happy with the Claude Code permission model and interface in general for coding stuff (For chat-y interfaces I have no real opinion)
so, interested how many people are running higher end AI models locally? Figure if I'm spending $800/month on tokens I can build a pretty beefy local machine for the cost of a few months spend - what is people's experience with say a $5k server custom built (and only for) running an AI model.
You will likely have to compromise on memory bandwidth or capacity under a $10k price. The Radeon R9700 has 32 GB of VRAM and is pretty cheap (~$1500 right now), which is what I primarily use. My home desktop has 128 GB RAM and my laptop has 96 GB RAM, but bandwidth limits make most models slow on those CPUs. Models with multi-token prediction are somewhat usable on them: Nemotron 3 Super runs reasonably well on my desktop but does poorly on agentic coding that I've given it; my laptop can run Qwen3.6-27B reasonably well with a version of llama.cpp that is patched for MTP support; but usually I run Qwen3.6-27B on my R9700. vLLM might support two or three R9700s on some OS, but I've not been able to get it to run at all with Ubuntu 26.04: system ROCm version is apparently different than what's in the container images, and system OpenMPI v5.0 finally removed C++ bindings that were deprecated in 2005 but are linked from some Python wheel that vLLM (probably indirectly) imports.
If you are spending $800/month on tokens you are likely to notice degradation for local models compared to near-frontier models. The models I can run locally are consistently worse than Claude Sonnet 4.6 (again for the work I give them), although Qwen3.6 does feel almost like magic for its size because it can do a lot. The really big open-weight models should be better, but they want 200+GB RAM, which will need a correspondingly expensive CPU.
Check in with /r/localllama. There's 100gb vram set ups from complete ewaste to single 8gb GPU inference machines.depends on what you want and can afford
I'm running a server in the 5K-league. And the results are very good. I get about 150 Tokens/s from Qwen3 for coding. And about 50 Tokens/s from the newer non-MoE Qwens.
I wouldn't bother with less than 32GB of VRAM. With 16GB you can already run something usable, but 32GB gives you much more power. 9B and 14B are only interesting if you want to tune models yourself. The sweet spot now seem to be around 27B-35B.
"What does work is a more interactive workflow where you’re clearly communicating with the model step by step, and giving it a lot of guidance. I’m sure that sounds pointless to many of you, why use a model where you have to babysit it as it works, but I actually found that it encouraged me to be more engaged. "
This sort of thing is key to knowing what's going on and bit having your brain fully atrophy.
People do use SOTA LLM’s for other things besides computer programming.
For instance, if you are an independent inventor trying to write a patent while keeping your patent lawyer expenses to a minimum, you want to write as much of the first draft(s) of the patent as possible yourself. (You’ll save billable hours with your patent lawyer, and you’ll end up with a better patent because you’ll communicate your innovations more clearly to your lawyer.)
However, and this is the big thing, you absolutely do not want to be asking a SOTA LLM for help with the language in your patent application. This is because describing your invention to a web based LLM could be considered a public “disclosure” of your invention, which, (after a one year grace period goes by), could put your invention in the public domain, basically… and thereby prevent you (or anyone else) from being able to ever patent the invention. Plus, you know, a random unscrupulous employee at the SOTA company could be reviewing logs and notice your great idea, and file a patent on it before you do. Remember, the United States patent office went to “first inventor to file” in 2013.
Oh and don’t take legal advice from random people on the internet by the way.
It takes people years to learn how to write a good patent. If you gave your lawyer your attempt at writing your own patent, they might use the info to understand what you want (you're right about that), but a good lawyer would probably just start from scratch.
Imagine you're a contractor. You have a client who knows nothing about software development that wants you to write some software for them. They give you some code they generated with an LLM to get you started. Would you use the code or start over?
Thanks; I assumed the author was talking about an Nvidia Tesla M4 (hence my confusion and assumption that they meant the M40 series, which has 24GB of VRAM).
Getting so close to good!
I consider Gemma 4 31B (dense / no MoE), the new baseline for local models. It's obviously worse than the frontier models, but it feels less like a science experiment than any previous local model I’ve run, including GPT OSS 120B and Nemotron Super 120B.
On my M5 Max with 128 GB of RAM and the full 256K context window, I see RAM use spike to about 70 GB, with something like 14 GB of system overhead. A 64 GB Panther Lake machine with the full Arc B390, or a 48 GB Snapdragon X2 Elite machine, could probably run it with a 128K to 256K context window. Maybe you can squeeze it into 32GB (27.5GB usable) with a 32K context window?
Even last year, seeing this kinda performance on a mainstream-ish/plus configuration would have seemed like a pipe dream.
Gemma 4 IS good, I've literally had it get a thing right that Opus 4.7 missed, the edges are ragged and I'm reliably finding usecases where it's basically equivalent. Ultimately the metric is "what can I RELY on it to do". Opus definitely knows a lot more and can sometimes do much more complex tasks, but especially when you're good about feeding the context Gemma is amazing. The difference between the sets of things I trust the two models to do is surprisingly small. I've had some insanely good runs recently working on my personal tooling as well as random projects. The first local model that can reliably left to implement features in agentic mode on non-trivial projects.
https://thot-experiment.github.io/gradient-gemma4-31b/
This is a relatively complex piece of tooling built entirely by Gemma 4 inside OpenCode where I manually intervened maybe only 4 times over the course of a few hours.
running Q6_K_XL, 128k context @ q8 ~ 800tok/s read 16tok/sec write
eagerly awaiting turboquant and MTP in llama.cpp, should take me to 256k and 25-30tok/s if the rumors are true
Re-posting this from a buried comment for visibility because it's just so fucking impressive to me.
I went to the store to buy mixers and while I was out Gemma 4 31b got pretty far along with reverse engineering the bluetooth protocol of a desk thermometer I have. I forgot to turn on the web search tool, so it just went at it, writing more and more specific diagnostic logging/probing tools over the course of like 8 turns. It connected to the thermometer, scanned the characteristics and had made a dump of the bluetooth notification data. When I got back it was theorizing about how the data might be encoded in the bluetooth characteristics and it got into an infinite loop. (local models aren't perfect and i never said they were) I turned on the websearch tool and told it to "pick up the project where it left off", it read the directory, did a couple googles and had a working script to print temperature, humidity and battery state in like 3 turns. Reading back throught it's chain of thought I'm pretty sure it would have been able to get it eventually without googling.
idk, I thought I was a cool and smart engineer type for being able to do stuff like this, if my GPUs being able to do this more or less unsupervised isn't impressive I guess fuck me lol.
Had a very similar experience recently.
Built a basic authentication handler for this test just so it wouldn't be in the training data of either model. It had deliberately planted bugs. One was a hardcoded secret, another was a wrap-on-0xFFFFFFFF bug as a result of a malloc(length+1).
Qwen 3.6 found both, alongside two other issues I hadn't been considered, and the location of the magic value. GPT-5.4, though, missed the malloc issue (flagging memory exhaustion as the only risk), it missed a separate timing bug (it explicitly said the function was safe), and it hallucinated the location of the magic value. Qwen correctly identified the integer overflow. GPT-5.4 did not.
I then compared basic research between them using SearXNG for web search. For example, the current status of MTP in llama.cpp. Qwen 3.6 27B found the current PR, but flagged a related issue that shows the current implementation can be slower than just using a draft model right now. GPT-5.5 Thinking found the same PR, but didn't flag the downsides.
In a similar comparison, I asked both models how I should get started with ESPHome as a total beginner. ChatGPT suggested an ESP32-S3 and a BME280, which is... just not a good idea. It also talked about the ESP32-P4 not having Wi-Fi, and installing with HA or Docker. Meanwhile, Qwen3.6 27B said regular ESP32, DHT22, and mentioned HA, Docker, and pip as installation methods. While GPT was good, it was just throwing out jargon for a prompt that explicitly requested it for a beginner.
It kind of blew my mind that in all three of these, Qwen landed it better.
It definitly is and just a few years ago unheared of.
And we progress on so many different frontiers in parallel: Agent harness, Agent model, hardware etc.
A technology indistinguishable from magic.
The small Qwen 3.6 models handle context a little better than Gemma 4, but Gemma 4 26B in particular has such small and efficient solutions which are really smart for its weight class. I was so impressed with its performance in our benchmark upon release that I wrote a blog post about it [0], although its position on the leaderboard later fell a bit as we ran it in more long context agentic coding environments.
[0] https://gertlabs.com/blog/gemma-4-economics
i use smaller model gemma e2b for most of my editing and it works surprisingly well. Workflow is planning with sota models and execution via small models. If you plan properly dont leave ambiguity for smaller model it works well.
Out of curiosity have you tried other small models? The e2b for me was unusable. Llama3.2 3b was better and that thing is a year old and I rarely use it now too.
Could you please share your time to first token and tok/s?
M4 Pro 64GB (14 CPU / 20 GPU), Gemma 4 31B Q4_K_M GGUF, LM Studio: time to first token 0.92s, 11.56 tokens/s.
Edit: For comparison with the other poster, same setup as above, but with Gemma 4 31B Instruct 8bit MLX (not sure if exactly the same model): time to first token 4.62s, 7.20 tokens/s; with a different prompt, 1.17s and 7.24 tokens/s.
Could you (or anyone with the same hardware) try antirez's ds4 and report how gracefully it degrades with only the 64GB RAM? Obviously it's going to be dog slow at best for any single inference flow, but can you meaningfully improve on that by running many sessions in parallel? (Ideally you'd need roughly on the order of model sparsity in order to get meaningful sharing of MoE weights, but whether that's genuinely achievable is anyone's guess!)
I’m on an M2 Max and get 10 tok/s with Gemma 4 8bit MLX
Does gemma work better than qwen3 in your experience?
Not in mine. I see a lot of people talking about Gemma on here but in my circles pretty much everyone else is running qwen.
I have an M4 Macbook Air with 32Gb.
These are my current results for my models:
I seem to be doing ok with the Gemma model for file parsing / handling.I could have used this article before I spent the weekend arriving to the same conclusion!
Same laptop, and my contrived test was having it fix 50 or so lint errors in a small vibe-coded C++ repo. I wanted it to be able to handle a bunch of small tasks without getting stuck too often.
GPT OSS 20B was usable but slow, and actually frequently made mistakes like adding or duplicating statements unnecessarily, listing things as fixed without editing the code, and so on.
Qwen 3.5 9B with Opencode was much faster and actually able to work through a majority of the lint warnings without getting stuck, even through compaction and it fixed every warning with a correct edit.
I tried 4bit MLX quants of Qwen 3.5 9B but it eventually would crash due to insufficient memory. I switched to GGUF, which I run with llama.cpp, and it runs without crashing.
It is absolutely not comparable to frontier models. It’s way slower and gets basic info wrong and really can’t handle non trivial tasks in one go. I asked it for an architecture summary of the project and it claimed use of a library that isn’t present anywhere in the repo. So YMMV, but it’s still nice to have and hopefully the local LLM story can get much better on modest hardware over time.
> It is absolutely not comparable to frontier models.
This is not said often enough.
Yes, local LLMs are great! But reading most HN posts on the subject, you'd think they're within reach of Opus 4.7.
There is a very small, very vocal, very passionate crowd that dramatically overstates the capabilities of local LLMs on HN.
Very different from my experience, Gemma 31b just solved a physics problem Opus 4.7 gave up on. I definitely don't think they're equivalent in general, Opus for sure is way smarter and way more likely to get things right on the edge, but it's still quite likely to get things wrong too it doesn't make it that useful for a lot of stuff. Conversely there are so many things that you would use an LLM for that they will both reliably oneshot. Especially in agentic mode where you have ground truth feedback between turns the difference gets quite small for a lot of tasks.
That all being said I've spent hundreds (maybe thousands?) of hours on this stuff over the past few years so I don't see a lot of the rough edges. I really believe capability is there, Gemma 4 31B is a useful agent for all sorts of stuff, and anything you can reasonably expect an LLM to oneshot Qwen 3.6 35b MoE will handle at like 90tok/sec, absolutely fantastic for tasks that don't require a huge amount of precision.
Sure. Sample size = 1.
If it works for me it works for me. Sample size of 1 is all I need to tell that.
The models op is using are from a year ago. The big breakthroughs happened in April this past month
It may surprise you but over thousands of hours I have actually gathered more than one sample.
EDIT: Here's another sample for ya. I went to the store to buy mixers and while I was out Gemma 4 31b got pretty far along with reverse engineering the bluetooth protocol of a desk thermometer I have. I forgot to turn on the web search tool, so it just went at it, writing more and more specific diagnostic logging/probing tools over the course of like 8 turns. It connected to the thermometer, scanned the characteristics and had made a dump of the bluetooth notification data. When I got back it was theorizing about how the data might be encoded in the bluetooth characteristics and it got into an infinite loop. (local models aren't perfect and i never said they were) I turned on the websearch tool and told it to "pick up the project where it left off", it read the directory, did a couple googles and had a working script to print temperature, humidity and battery state in like 3 turns. Reading back throught it's chain of thought I'm pretty sure it would have been able to get it eventually without googling.
idk, I thought I was a cool and smart engineer type for being able to do stuff like this, if my GPUs being able to do this more or less unsupervised isn't impressive I guess fuck me lol.
What is your opinion on qwen 35b MOEvs qwen 27b dense?
This.
I have seen way too many people who are overly optimistic about local LLMs.
Having spent a decent amount of time playing with them on consumer nvidia GPUs, I understand well that they not going to be widely usable any time soon. Unfortunately not many people share that.
So the cofounder of hugging face made a post about qwen 3.6 being atclaude level of performance for the lols?
When were you trying local models? The model releases from April 2026 are a serious change in performance.
Not this. Let's reframe the problem. How many years behind do you think they are? By all accounts Gemma 4 is better than a frontier model from 3 years ago. Back then we were wowed by frontier models but when the local model reaches the same performance it's no good anymore, because you moved the target?
Relatively speaking local models might always be behind the curve compared to frontier ones. You can tell by the hardware needed to run each. But in absolute terms they're already past the performance threshold everyone praised in the past.
Right now in a lab somewhere there's a model that's probably better than anything else. There's a ChatGPT 5.6, an Opus 4.8. Knowing that do you suddenly feel a wave of disappointment at the current frontier models?
You are missing context.
A local model is as good as a frontier model for responding on a signal threat with you which requieres basic tool calling.
A local model is as good as a frontier model of writing a joke.
A local model is as good as a frontier model at responding to an email.
Not sure what needs to be said often enough, no one without a clue would play around with local model setup and would compleltly ignore frontier models and their capabilities?!
At least in my experience, local models are very far away from models like Opus 4.7 or ChatGPT 5.5 in coding and problem solving areas.
I find them useful in basic research and learning and question asking tasks. Although at the same time, a Wikipedia page read or a few Google searches likely could accomplish the same and has been able to for decades.
I think you're doing it wrong. Use the frontier moddels for the research, planning etc and once you have a plan give it to a local model for implementation.
The guy is running potato models!
Im like 50% convinced that these people are paid by Apple to promote their products. Because the conversation is always just being able to execute models (even larger ones), on mac hardware with unified memory, but nobody ever mentions that inference speed is unusably slow.
You can have good local LLM performance through agents, but you need fast inference. Generally, 2x 3090 or at the minimum 2x3080s (you need 2 to speed up prefill processing to build KV Cache). You just ironically need to be good at prompt engineering, which has a lot of analogue in real world on being able to manage low skilled people in completing tasks.
Try qwen3.6.35 a3b not qwen3.5 9b. It's completely different.
Honestly surprised to hear that GPT OSS 20B runs slow on mac hardware. It's absolutely one of the fastest models I've run on local GPUs for its size, but only tried Nvidia cards.
Edit: TIL it is MoE and only has 3.6B active, explains a lot.
Yeah, I'm probably wrong there. GPT OSS 20B is certainly much faster than some other models I've tried. I actually gave GPT OSS 20B a few prompts just now and it seems to respond as fast or faster than Qwen 3.5 9B. But I needed many more prompts for GPT OSS 20B to complete my contrived task, so progress felt much slower.
I think it's useful to be realistic about what you can do with a local model, especially something as small as the 9B the author is using. A 9B model is around the level of Sonnet 3.6 - it can do autocomplete and small functions but it loses track trying to understand large problems.
But the are interesting and fun to play with! I do a LOT of work on local agent harnesses etc, mostly for fun.
My current project is a zero install agent: https://gemma-agent-explainer.nicklothian.com/ - Python, SQL and React all run completely in browser. Gemma E4B is recommended for the best experience!
This is under heavy development, needs Chrome for both HTML5 Filesystem API support and LiteRT (although most Chromium based browsers can be made to work with it)
It's different to most agents because it is zero install: the model runs in the browser using LiteRT/LiteLLM (which gives better performance than Transformers.js), and Filesystem API gives it optional sandbox access to a directory to read from.
It is self documenting - you can ask questions like "How is the system prompt used" in the live help pane and it has access to its own source code.
There's quite a lot there: press "Tour" to see it all.
Will be open source next week.
But I was doing a lot more than autocomplete and small functions with Sonnet 3.5.
Not to be nitpicky, but many of the 4-12b models are somewhere between GPT-3.5 and GPT-4o-mini. It's hard to find a good comparison though, because the benchmarks people score models against change so often. For reference, Sonnet 3.6 came out about a year after GPT 3.5
Don't worry about being nitpicky! I'm going to out-nitpick you....
Actually....
I write and publish my own benchmark for this stuff. It's an agentic SQL benchmark which isn't in the training data yet and I've found can separate frontier models from close-followers (the only models to get 100% are Opus 4.6 and GPT 5.5).
The best small model I've found is a fine-tune of Opus-3.5 9B which scores 18/25: https://sql-benchmark.nicklothian.com/?highlight=Jackrong_Qw...
Haiku 4.5 scores 20/25, and Haiku is certainly better than Sonnet 3.6. GPT 3.5 scores 13/25.
Critics are (rightly) pointing to the fact that these models are not on par with SOTA for complex coding tasks. But many seems to forget that a large part of white collar office work is Excel crushing, file moving, translating dry legal documents, e-mail drafting, PPT drudgery, etc. These are absolutely doable with 30-35b+ models with the added benefit of keeping company data private.
I think the conclusion is flawed here? Sure qwen3.5 9b is nowhere near the sota models. It's 9b and was made a year ago? Everyone taking about local models is pumped about the models released in April this year. Qwen 3.6 27b and qwen 35b a3b if you have a sad GPU. Those are comparable to sota models, seriously.
Arguably excel and legal are much worse than code because catching the mistakes can be much harder.
Case in point, JPMorgan London Whale incident, $6 billion loss caused by an excel error...
Yes... I mean organisations have to adapt to this new working scheme. First they need new processes (maybe borrowed from SW development) that enables them to triage work products on a risk/reward scale. For example my wife works on medical device tenders. It is obligatory to translate every frikkin Word document to our native language which in the end noone will read. Do we use LLMs to do the translation? Hell yeah. For a critical legal document? Eeee. Also I think enablers like speical harnesses shall be developed/improved by keeping these folks in mind. For example to build hooks into the harness that forces the LLM to test/review/sample its output. So yes it's a complex topic, but my point was rather that the inherent capabilities of medium-large-ish open LLMs are sufficient for let's say 70-80% of such office work, and it's a huge market.
Running LLMs local is fun and powerful but if you want to get work done... it is a big headache. You have to pre-plan and plan, and make specs, etc... The big OpenAI, Claude models just get you with just a few sentences..
Yup, especially when for a lot of us, the price of the frontier subscription has become a cost of doing business over the last 6 months.
If you're already doing big boy stuff with big boy models, then... just carry on trucking!
Only place I'd differ is for vision/OCR tasks. Small/medium open weights models are as good as SoTa, and token prices for prefill are kinda very not worth it for larger batch tasks.
Other thing that people forget is, if you want to have even a smallish LLM as a reliable personal service, you've got to carve out 16-24 of (V)RAM and leave it permanently running.
It's actually technically easy now to run a large model at home for offline use (thanks to the Chinese who release their top-notch models).
The main problem is finding the money :/
I am running qwen 3.6 9b quantized model on my m4 pro 48gb and it is barely useful to do some basic pi.dev/cc driven development. I think 128gb desktops are the sweet setup to actually get meaningful work done. However, getting your hands on one of these machines is difficult at the moment.
As much fun as it is to run these things locally don’t forget that your time is not free. I am slowly migrating my use cases to openrouter and run the largest qwen model for < $2-3/day with serious use for personal projects.
Was the choice of such a small model driven by a desire for high tok/sec? I ask because an m4 pro 48gb machine can run larger models (if model intelligence is the thing that would make it more useful).
Yes that was my goal. Also noticed a huge performance gain going from ollama to mlx. Your mileage may vary.
I'm using the 30b MOE model on same spec with 65k tokens as a sub agent with tooling and it absolutely writes decent code. The dense 9b I agree wasn't great.
Thanks for saying this. There's so much nonsense out there online about local models being better than Opus 4.7 and the like. It's just not true for regular users.
I have a brand new M5 MacBook Pro - top end with all the specs and I've tried local models and they're barely functional.
What models and quantizations have you been trying? I've had great success with the larger Qwen 3.x models at 6-bit levels. Using 6 bit quantization is really the bare minimum to give local models a fair shot at agentic flows. Once you start pushing below that the models become more "dumb" from the limited bit space.
The main benefits for local are:
1) control 2) privacy 3) transparent cost model
Cloud has tremendous value for speed, plug and play, and performance. You need to decide how those compete with the benefits of local - both today, and a year from now, e.g.
How does it (the openrouter version) compare to ChatGPT 5.5 or Claude Opus 4.6?
Good enough. It gets 60-70% of the work I need done for a lot less $ (keep in mind I am using these for personal projects that doesn’t generate revenue). If I was using it with the hopes of making money I think I would just use Codex at this point.
"burn your thighs without getting anything out of it." what a phrase. love it.
I got qwen3.6:27B running on my 4090 (24GB) with ~128K context leveraging some of the recent turboquant/rotorquant memory optimizations for activations. Highly suggest going up to that. the q4_xl+rotorquant combo is pretty good.
Some reference code if you want to throw your agent at it. https://github.com/rapatel0/rq-models
Thanks for sharing. I made a post earlier on bluesky describing my random setup on 32gb M2 studio. I'd love feedback. I'm a monkey and if I don't see I can't do.
https://bsky.app/profile/mooresolutions.io/post/3mliilyf2i22...
I am considering a M5 Pro (18/20C) Macbook with 64GB of RAM, but I'm having a really hard time finding benchmarks of real world models:
Could somebody please provide some tokens-per-second numbers for example for Qwen 3.6 35B/A3B, specifically for Q4 and Q6 quants?
My advice: don't just look at tokens per second, but also at time to first token (TTFT).
The local inference space is leaning to MoE models, and a lot of them have decent tokens / second, but horrible TTFT.
I'd rather spend thousands dollars on a Mac than subscribing API. The local model allows me to do my work any time and anywhere, without worrying about privacy leak.
Recent models (Qwen 3.6 and Gemma) can really do coding locally. Feels like SOTA from maybe a year ago? But you would want about 32-40GB total memory. 24GB is just a bit short of that. A gaming PC with 16GB graphics card and 32GB RAM brings you very close to a usable coding system.
That’s the exact ram/vram combo of my desktop - what model would you suggest for that gaming pc setup?
I would recommend to start withQwen 3.6 35B at maybe Q5, it should be fast in that setup. For intelligence Qwen 3.7 27b, is smarter but will run much more slow. Others also mention gemma 4, which might be worth a try.
> Feels like SOTA from maybe a year ago?
Agree but only for small projects. SOTA from a year ago still wins on larger projects
"Coding system" "can really do coding locally"
Vibe coders out here thinking all software development is solved by because they made an (ugly and unoriginal) dashboard for their SaaS clone and their single column with 3x3 feature card landing page thats identical to every other vibe coders "startup"
How are you using that RAM with the GPU?
Llama.cpp with automatic offload to main memory. You can also use Ollama, it is easier, but slower.
For those who want a GUI, LM Studio does this too (with llama.cpp as the backend I think). I'm getting great (albeit slow) results with Qwen3.6-35B MoE on 8GB GPU RAM, 40GB system RAM.
Still trying to understand if a Macbook Pro M5 Max with 128GB is likely going to be able to run coding models well enough that I can cancel my Codex, or even go down to the $20/month plan.
A 128GiB MacBook Pro in Canada is what, north of CAD $11k after tax? That’s around USD $7k. At $20/month for a cloud AI subscription, you’re looking at almost 30 years of service for the same money.
How long do people realistically expect a laptop to stay competitive with SOTA local models? Especially in a space where model sizes, context windows, and inference requirements keep moving every year.
And even if the hardware lasts, the local experience usually doesn’t. A heavily quantized local model running at tolerable speeds on consumer hardware is still nowhere near frontier hosted models in reasoning, coding, multimodal capability, tool use, or reliability.
The economics just don’t make sense to me unless you specifically need offline inference, privacy guarantees, or low latency for a niche workflow. Otherwise you’re tying up $10k upfront to run an approximation of what you can already access through a subscription that continuously improves over time.
You could literally put the difference into index funds and probably cover the subscription indefinitely from the returns alone, even accounting for gradual price increases.
Buy a Framework Desktop with 128 GB instead. It's half the price, and though I bought it for even less before RAM prices went crazy.
You can buy a used GPU for under 400 dollars if you already have a desktop and run qwen 3.6 a3b and for a majority of frontier tasks get by just fine. Why do you need to spend 10k on a laptop, we are swimming in ewaste.
But what if you were going to buy a laptop anyway? Obviously you can't do anything with less than 64 GBytes these days, so the question is just whether you go for the jump to 128.
In the UK, it's currently an extra £800 to get a 128 GB vs the 64 GB equivalent. So that's more like 3 years of Claude - I think? - assuming current prices stay the same.
Or: you might just feel like £800 isn't an unjustifiable amount of money (one way or another), and tick the box, on the basis that it might just work out. As the saying goes, in for 459,900 pennies, in for £5,399...
> Obviously you can't do anything with less than 64 GBytes these days
I don't think that's true. Plenty of people can run basic workflows at 8GB on the MacBook Neo and most others are fine at 16 GB.
I am a developer, as many of us on here are. I currently have 32GB of RAM and am constantly fighting swap. 64GB would be min even w/o local model.
I rebuilt the entire fastcomments moderation UI 2yrs ago with webstorm on my 16gb thinkpad. 64gb is nice but not needed. I wonder if every dev didn't use an M4 Pro if software wouldn't be so resource hungry...
Realistically it's 48 M5 Pro vs 128 M5 Max due to constraints on how you can configure them. So a more substantial difference of ~2k US.
You are assuming I'd only get it for that. That would probably just be the straw that broke the camels back, but I'm already thinking about a purchase even if that doesn't work out.
You have to use the item a lot, to the point where you'd be exceeding subs a lot
This is one of the best takedowns of local models I've ever seen.
I just hate paying money for cloud subscriptions, and work has given me a decent laptop
Have been using Qwen 3.6 27b recently along with various other models the last month and it is very capable for writing code at a level I haven't need to use a subscription for 95% of what I throw at it. Been using it to write extensions for Pi to expand tool kit without much fuss as one example. Is it as fast or SOTA? No, but you can't ignore how functional it is on hardware you own. Where it can begin to struggle is giving too open ended prompts or investigating complex technical issues. At that level its knowledge is not high enough to solve those problems on its own.
Having an M3 with 36 GByte I was under the assumption, that I can utilize like Qwen and similar models. It's quite easy to set up, you can use pi or hermes for CLI access, or "Continue" to use it in VS Code. You can choose between omlx, Ollama and even more to run the model itself. It's no rocket science, but the results are also not satisfying.
I use it occassionally for very easy tasks, fix typos or update meta data in blog posts. So yeah, it improves productivity. But coding-wise it's far away from Codex, Claude et al.
Beyond the models getting better; there are still huge gains available in the inference engine side with new tricks like Dflash, MRT, turboquant - for some usecases these can multiply the speeds. There are even some model specific optimized kernels like for DeepSeek 4 flash that seem wild.
Makes me feel we are nowhere near the optimum yet.
Examples: https://dasroot.net/posts/2026/05/gemma-4-speed-hacks-mtp-df...
https://x.com/bindureddy/status/2052982206344409242?s=46
what's MRT?
Sorry, autocorrect got me there: MTP is what I meant.
I'd pick a much more open system with more capabilities for a little bit more money, e.g. a Jetson Orin 64GB (unified memory). Runs Linux out of the box.
Well, but if I have a MacBook Air M4 with 16GB, I don't know what useful models can I run.
`brew install llmfit`
How about a M4 with 16GB of memory?
What kinda harness do people use with these local models? I am quite happy with the Claude Code permission model and interface in general for coding stuff (For chat-y interfaces I have no real opinion)
Good to keep hideThinkingBlock default, is on purpose to be able to steer de model.
I'll have to try some more. I've been playing with gpt-oss 20b on my M4 24GB but it hasn't been the best experience.
so, interested how many people are running higher end AI models locally? Figure if I'm spending $800/month on tokens I can build a pretty beefy local machine for the cost of a few months spend - what is people's experience with say a $5k server custom built (and only for) running an AI model.
You will likely have to compromise on memory bandwidth or capacity under a $10k price. The Radeon R9700 has 32 GB of VRAM and is pretty cheap (~$1500 right now), which is what I primarily use. My home desktop has 128 GB RAM and my laptop has 96 GB RAM, but bandwidth limits make most models slow on those CPUs. Models with multi-token prediction are somewhat usable on them: Nemotron 3 Super runs reasonably well on my desktop but does poorly on agentic coding that I've given it; my laptop can run Qwen3.6-27B reasonably well with a version of llama.cpp that is patched for MTP support; but usually I run Qwen3.6-27B on my R9700. vLLM might support two or three R9700s on some OS, but I've not been able to get it to run at all with Ubuntu 26.04: system ROCm version is apparently different than what's in the container images, and system OpenMPI v5.0 finally removed C++ bindings that were deprecated in 2005 but are linked from some Python wheel that vLLM (probably indirectly) imports.
If you are spending $800/month on tokens you are likely to notice degradation for local models compared to near-frontier models. The models I can run locally are consistently worse than Claude Sonnet 4.6 (again for the work I give them), although Qwen3.6 does feel almost like magic for its size because it can do a lot. The really big open-weight models should be better, but they want 200+GB RAM, which will need a correspondingly expensive CPU.
Check in with /r/localllama. There's 100gb vram set ups from complete ewaste to single 8gb GPU inference machines.depends on what you want and can afford
I'm running a server in the 5K-league. And the results are very good. I get about 150 Tokens/s from Qwen3 for coding. And about 50 Tokens/s from the newer non-MoE Qwens.
I wouldn't bother with less than 32GB of VRAM. With 16GB you can already run something usable, but 32GB gives you much more power. 9B and 14B are only interesting if you want to tune models yourself. The sweet spot now seem to be around 27B-35B.
"What does work is a more interactive workflow where you’re clearly communicating with the model step by step, and giving it a lot of guidance. I’m sure that sounds pointless to many of you, why use a model where you have to babysit it as it works, but I actually found that it encouraged me to be more engaged. "
This sort of thing is key to knowing what's going on and bit having your brain fully atrophy.
People do use SOTA LLM’s for other things besides computer programming.
For instance, if you are an independent inventor trying to write a patent while keeping your patent lawyer expenses to a minimum, you want to write as much of the first draft(s) of the patent as possible yourself. (You’ll save billable hours with your patent lawyer, and you’ll end up with a better patent because you’ll communicate your innovations more clearly to your lawyer.)
However, and this is the big thing, you absolutely do not want to be asking a SOTA LLM for help with the language in your patent application. This is because describing your invention to a web based LLM could be considered a public “disclosure” of your invention, which, (after a one year grace period goes by), could put your invention in the public domain, basically… and thereby prevent you (or anyone else) from being able to ever patent the invention. Plus, you know, a random unscrupulous employee at the SOTA company could be reviewing logs and notice your great idea, and file a patent on it before you do. Remember, the United States patent office went to “first inventor to file” in 2013.
Oh and don’t take legal advice from random people on the internet by the way.
It takes people years to learn how to write a good patent. If you gave your lawyer your attempt at writing your own patent, they might use the info to understand what you want (you're right about that), but a good lawyer would probably just start from scratch.
Imagine you're a contractor. You have a client who knows nothing about software development that wants you to write some software for them. They give you some code they generated with an LLM to get you started. Would you use the code or start over?
I'm puzzled. The M4, as far as I know, doesn't have 24GB. Did the author mean a M40?
There’s definitely an option with 24 gigs of ram: https://support.apple.com/en-ca/121552
Ah, thank you. I was assuming a Nvidia Tesla M4.
M4 Mac Mini w/24GB sitting right here on my desk.
Thanks; I assumed the author was talking about an Nvidia Tesla M4 (hence my confusion and assumption that they meant the M40 series, which has 24GB of VRAM).
M4 = M4 Macbook Pro
Or Air
A useful data to know about this setup is how many tokens/sec generates.
It’s started in TFA
You can't expect someone to read 4 paragraphs into an article before commenting
@grok is this true?
Sorry, @grok is offline after declaring himself MechaMussolini earlier today
The site does not have ssl. Please can you enable it so that I can read the article?