Every point of friction, every struggle documented in minute detail, on a long and bumpy path to some kind of result. The stakes are zero, the whole project an act of pure expression. It is like a kind of oasis in a desert of articles about new ML models. I don't mind that HN is all about new models all the time now, but content like this being on the front page is soothing.
What a throwback. I remember reading this guy's build of the "Flying Nimbus" [1]--an early version of the Onewheel--back in 2015. In fact, the Flying Nimbus and the Onewheel were both released in 2014, but it appears they were produced independently, once again demonstrating the curious phenomenon of Multiple Discovery [2].
Thanks for the kind words!
Nimbus was a really fun project, just spent a bit re-formatting previous writeups to be more modern-web compliant. The one-wheel was indeed a weirdly synchronous release, I had no idea it would be as wildly successful as it became.
Extraordinary post. To be honest, didn’t even strike me to use TPU for shear resistance. But of course. Good rookie tip among much in there. Fantastic work.
And, BTW (this post reminds me), if anyone wants to help: I'm planning on trying to knock out an inexpensive, open-source "Dykstraflex-like" [1] camera from off-the-shelf and 3D printed parts this Fall.
[1] I kind of figure if you know what a Dykstraflex rig is you're already more likely to be the kind of person that will want to help—so this footnote does little to help those that are puzzled by the term Dykstraflex.
Dane is the real deal. I've never figured out how he finds the time to build all these amazing contraptions let alone document them in meticulous detail while maintaining a full time engineering job. But it's definitely impressive.
Wow. Honestly I wish there was more emphasis on hardware people/startups than software. This is a prime example of why, the amount of time and effort that went into this clearly shows through to the end!
Can't imagine LLM's reproducing this from first principles.
Technology and gadgets used to sound quite amazing, cute and desirable to have and experience. But now they look like plastic feed, triggering a vomit feel. I think revolt against anything tech is around the corner.
Visiting your world must really be depressing. Fortunately, we can go to the OPs world, find a little joy in his experience, and avoid you and your misery altogether.
Every point of friction, every struggle documented in minute detail, on a long and bumpy path to some kind of result. The stakes are zero, the whole project an act of pure expression. It is like a kind of oasis in a desert of articles about new ML models. I don't mind that HN is all about new models all the time now, but content like this being on the front page is soothing.
I am framing this comment and putting it on my desk
What a throwback. I remember reading this guy's build of the "Flying Nimbus" [1]--an early version of the Onewheel--back in 2015. In fact, the Flying Nimbus and the Onewheel were both released in 2014, but it appears they were produced independently, once again demonstrating the curious phenomenon of Multiple Discovery [2].
[1] https://transistor-man.com/flying_nimbus.html
[2] https://en.wikipedia.org/wiki/Multiple_discovery
Thanks for the kind words! Nimbus was a really fun project, just spent a bit re-formatting previous writeups to be more modern-web compliant. The one-wheel was indeed a weirdly synchronous release, I had no idea it would be as wildly successful as it became.
Extraordinary post. To be honest, didn’t even strike me to use TPU for shear resistance. But of course. Good rookie tip among much in there. Fantastic work.
Love it!
These kinds of posts are one of the reasons I stick around.
I have a friend that does these kinds of projects, all the time, and shared it with him.
I would love to see a First person view of that tumble
Right? Major let down! It's a combination of click bait and rage bait at the same time.
The googly eyes are such a nice touch! Great writeup.
They do really shine during the tumble especially.
Love how that adds a nice element of fun to an otherwise impressive project and writeup.
Very cool.
And, BTW (this post reminds me), if anyone wants to help: I'm planning on trying to knock out an inexpensive, open-source "Dykstraflex-like" [1] camera from off-the-shelf and 3D printed parts this Fall.
[1] I kind of figure if you know what a Dykstraflex rig is you're already more likely to be the kind of person that will want to help—so this footnote does little to help those that are puzzled by the term Dykstraflex.
Dane is the real deal. I've never figured out how he finds the time to build all these amazing contraptions let alone document them in meticulous detail while maintaining a full time engineering job. But it's definitely impressive.
Wonderful writeup! Really embraces the old internet character from the days before people started putting ads in the personal websites.
Wow. Honestly I wish there was more emphasis on hardware people/startups than software. This is a prime example of why, the amount of time and effort that went into this clearly shows through to the end!
Can't imagine LLM's reproducing this from first principles.
> Movi M10 uppper brace and bolt holder
They're cat ears. You can just admit it. We won't judge.
Now this kids is Hacker News.
Technology and gadgets used to sound quite amazing, cute and desirable to have and experience. But now they look like plastic feed, triggering a vomit feel. I think revolt against anything tech is around the corner.
Visiting your world must really be depressing. Fortunately, we can go to the OPs world, find a little joy in his experience, and avoid you and your misery altogether.
That's, like, your opinion man.
I think this piece of tech looks fabulous!
This is an amazingly tone-deaf response to what is clearly an personal artistic project with a lot of heart behind it.
It’s rage bait