TokenRing was already an academic curiosity when I was getting my CS degree in the mid-90s. The CS department by that point had already switched to twisted-pair Ethernet. By the time of my first job in the late 90s, we used FDDI for our web farm's backend network, but we tore that out with the arrival of gigabit, so FDDI didn't last too long either.
The "WAS" in that title just made me feel really old. I remember learning about this in college and it being a thing that I would need to work with and understand how it works why it's different than ethernet. And now it's just a big "WAS".
I remember learning about TokenRing in high school circa 2005 for the CompTIA+ certificate.
Never ever seen it in my life though. It was a big "WAS" even then.
The i386-i486 machines we had in middle school were on the Ethernet bus (I remember the BNC cable going along the classroom, with T-joints to the network cards).
IIRC Token Ring wasn't a thing in practice for 100Mbit speeds and beyond, and went the way of the dodo faster than DOS did.
We used to love token ring style networks (specifically ARCNET) for playing Doom, Descent and Quake back in the day. ARCNET was more annoying to set up and had thicker cables, but it was rock-solid reliable afterwards. Totally bulletproof.
In comparison to that, traditional ethernet (think concentric cabling and terminators) glitched often and one flaky part of a cable could ruin your day.
ARCNET was much slower in theory, but robust, fair and stable and did not totally die under load from a single client.
People may forget that Ethernet originally had a shared transmission medium and collisions were a serious limitation. Switching was a later addition that mostly solved collisions and really paved the way for Ethernet as we know it today.
Hubs were still just barely still relevant when I first started learning networking, but it was late enough that I don't think I've ever encountered one in serious use. Especially after port mirroring became a common feature even on affordable switches. I think we had an old pile of industrial/scientific test equipment in grad school nobody wanted to touch that was using an old Cisco hub, but my memory is fuzzy.
I've definitely never seen any old Thicknet networks in use, though I have seen Token Ring in active use semi-recently. I never learned anything about Token Ring other than I remember old CompTIA mentioning it existed.
I do have a fondness for seeing this old tech that was way out of my reach or just barely too old to encounter back in the day being used, it's so neat to learn about. ClabRetro on YouTube is one of my few "drop everything and watch a new video" creators.
Back in 1999 I was still doing the crawling-under-desks thing. I was at a tobacco companies sales office... and they had a wallplate with ports labeled token ring, ethernet, and appletalk (looked rj11, so phonenet?). A year or two later I worked at their central location in Virginia in a warehouse decommisioning old equipement, got to see some FDDI and HIPPI hardware. Never saw it being used though.
And at my previous job, in a quite normal office, there was a wallplate labeled DEC with the weirdest jack I've ever seen. I couldn't visually identify it, and I thought I knew everything. 1.5" inches wide, with a plastic spring-loaded cover that came down from the top. Maybe only two conductors in it, not normal rj-style pins at all. I'd guess something Vax, but I thought those were always ethernet since the early 80s, and anything older still wouldn't likely have survived until 2025.
There's a Minecraft YouTuber called TangoTek who's building a deck building game called Decked Out 3 in Minecraft. That is using a token ring system to control events and messages sent in the game to avoid conflicts [1].
My local hospital system (Premier Health) was all-in on IBM and token ring. I remember being chagrined when they built a new hospital in 1998 and wired everything for token ring. The writing was clearly on the wall for token ring by 1998 but their IT department bled IBM blue.
Fast-forward to 2013, when my wife was giving birth to our daughter in one of their hospitals, and I noticed an unused type-1 token ring wall jack in our room right beside some occupied 8P8C (aka RJ-45) jacks.
Token-passing networks were interesting for hard real time system analysis, as they featured deterministic access control instead of collision detection. They made possible extending Rate Monotonic Scheduling theory to the network layer as well. The priority work (priority ceiling protocol, multi level token priority schemes) survive today in token bucket rate limiting.
Interestingly, the CAN bus features deterministic access control through collision detection, using a bus topology rather than a ring topology. I've had bad experiences with CAN, but I believe they're due to hardware bugs and/or driver bugs rather than the underlying design.
Arbitration in CAN is still one of the coolest things I've seen at the hardware layer.
Being able to handle a collision without needing the higher priority message to skip a single beat seemed like magic to me when I first learned about it
the token bus combines the one-user-at-a time of a bus with the potential-token-loss of a ring.
IEEE 802.4 token bus standard was withdrawn
polled buses with a master are pretty common when you don't mind the performance hit and central-point-of-failure. i believe cable networks work this way.
I worked with Prime minicomputers when I was a late teen. They introduced RingNet, a token ring product, in 1979.
Fun fact: each system had an IN and an OUT coax port, and the coax cable was about as thick as a thumb. If a system died, a small hardware box short circuited, tying the IN and OUT coaxes together. This kept the ring intact, but it would also make that segment of the network longer and there were strict distance limitations between nodes. If the distance got too big, the entire ring broke. Also, if any coax cable got damaged, that also lead to a ring break. Prime had a special diagnostic program they could use on multiple nodes to try to find ring breaks.
Token Ring was a networking alternative to Ethernet.
With Ethernet when a node wants to transmit it just does so, then backs off and retries if there was a collision (someone else trying to transmit at the same time).
Token Ring avoided collisions by passing a "permission to transmit" token from node to node in circular (ring) fashion.
> and unlike Ethernet, all the cards on the ring had to talk at the same speed.
Essentially that was the same for Ethernet too, everything on the same leg needs to talk at the same speed, though IIRC a different speed device wouldn't take down everything, it would just cause a significant excess of collisions due to the out-of-sync cross-talk and not be able to talk to anything itself. It wasn't until switching hubs and full switches were around that you could mix speeds on the same leg (with a switching hub you'd actually have two legs, one at each speed, bridged, with a full switch you have a separate collision domain per port so can mix speeds quite freely).
I just read through his Wikipedia entry and didn't see that he'd gone ''crazy'' unless you mean his political views? He's dead now anyways. I linked to that comic because I had bosses like that way back when.
I think you mean "went" and I wish there was a very brief plain text summary rather than a long video that I don't have time to watch. Anyway, I enjoyed the token ring comic and don't have strong feelings about the cartoonist now that he's gone.
Oh, flashback to learning queueing theory decades ago!
In principle, token ring was faster than Ethernet (which was CSMA/CD in the day): the mathematics of token ring were exact and analytic, and, when solved, gave higher speeds and better reliability than Ethernet, the mathematics of which were so complex (think three-body-problem) that analytic solutions were available only for bounding equations, which resolved to slower than token ring.
In practice, Ethernet was much faster.
A classic "the model is not the territory" problem.
At a 2600 conference long ago, we built a cluster of public X11 dumb terminals, so hackers at the conference could browse the web and such. We hardened the server against local user attack, and the clients booted from a read only solid state media (aka, floppy disk) with no port access. But how do you harden a physical network against a thousand hackers? Solution: token ring. We made the network so ancient that nobody would have the hardware to hack it that weekend. Worked great.
> Coax connectors for Token Ring did exist, but were more common on Ethernet networks.
I don’t disbelieve the author here but anecdotally the only time I’ve worked with coax BNC plugs for networking is with TR. And it be never seen a TR network in the wild that wasn’t coax.
It’s interesting to read that other cable types existed for TR.
The first time I read about this was about 35 years ago. I read about it in a computer science textbook my father owned. I was just a child so I never thought much about it, except that the name was pretty cool.
That textbook was sort of system textbook which describes a lot of low level stuffs such as networking, hard disks and such.
FYI cable networks (upstream) are essentially token ring.
In fact, broadcast ethernet is essentially token ring, except instead of a token it just grabs the wire. Only one machine can grab the wire at a time. Switches hide that from most people.
No, DOCSIS is nothing like token ring. It doesn't use tokens, it uses channels for up/down and TDMA/CDMA.
No, 'broadcast ethernet' is not token ring. There is no token. It's not a ring. Switches do hide the details, but it's hiding collision domains, not token passing.
I love watching this channel as a 20-something who never had a chance to see/touch the hardware he's working with. Great way to show the real-world applications of this tech rather than just reading historical summaries in textbooks.
Some of it is very telling about how close we were to having a completely different tech ecosystem. Have you seen his video on Sun thin clients? They had this tech working back when PCs were $2k a pop. They had this cheap thin client that had all the peripherals and authentication, plus a very rich java runtime and libraries, but due to mismanagement the tech never got off the ground.
IBM POWER is another odd one. They are still going strong because their shit Just Works so anyone doing Serious Business just keeps using them. They have hot pluggable CPU and ram ffs! Compared to cloud computing they are tiny, but they aren't going anywhere anytime soon.
I find this guy kinda annoying. I mean, yeah...seems like he did some networking back in the day, but everything he posts is just enough off (or ia Google-correct, not Been-There-correct) that I can't quite take him seriously.
The main reason Ethernet won the war was because it was cheaper.
He should have stopped there. That was it. And because it was cheaper, less complicated to build the chips, 'good enough' networking, a bunch of folks jumped on the bandwagon. And here we are.
If you had a 16 megabit network and brought up a system at 4 megabits, it took down the whole network.
Well, yes, everyone who has ever mentioned TR tells some variation of this. And if you left the terminator off of the coax ethernet, you brought the whole network down. But TR got smart MAUs and ethernet got UTP hubs around the same time and problem solved.
And hubs were a lot cheaper than smart MAUs. Sooo...
Ethernet was junk if you went with the cheapest options all around, but you could make it acceptable if you invested some of the savings in improved technology.
Just like TR. If you were deploying dirt cheap 8228s after 1990 or so, your network still sucked. You didn't do that.
But the other reason Ethernet won was because of scale.
Yes, there was a thing called 100Mb Token Ring. Someone might have even shipped some number of them. I never saw one in the wild, and I don't know anyone who claimed they had who didn't work for IBM or Madge (which, btw, wasn't an 'obscure' network company at the time and made more than just TR cards).
That's because basically everyone who did Token Ring (IBM most of all) had decided that you wanted to scale TR you were going to ATM (for a bunch of mostly political and marketing reasons). Which, unlike TR, was in reality a very bad idea, but that's another story.
I've never even heard anyone even suggest 128Mb Token Ring, and I suspect someones LLM is hallucinating. There was a gigabit Token Ring standard (IEEE 802.5v), but I feel pretty confident saying noone ever shipped it. Like I said...ATM was gonna be the future.
Ethernet used a 15-pin connector that looks quite a bit like a PC joystick connector. Token Ring used a 9-pin connector that looks like a 9-pin video connector or an Atari style joystick plug.
Ok...I'll just be snarky and point out there are ethernet cards that use a 9-pin D-sub connector to reuse a TR wiring physical plant. I have several.
Coax connectors for Token Ring did exist
Citation needed. I've seen coax for 802.4 industrial networking stuff, which is not TR. I'm betting more hallucinations.
ARCNET was another competitor from the same timeframe. It, too, was a contender for a while because it was backed by Datapoint, a pioneer in office automation using small computers.
Arcnet was a contender because it was even cheaper than ethernet and it was (and still is) widely used in industrial environments. And some popular early PC file sharing systems (e.g. LANTastic) would use Arcnet.
Apollo Domain computers had a token ring which used coax. RCA phono plug connectors. We had a pair of those at the aerospace company for testing.
Worked OK, but too weird. We ended up with Sun workstations.
At various times in my early career, I was involved with strange networking hardware only of historical interest now. Apollo Domain (sort of like Unix, but not.) "Thick Ethernet" 10BASE5. Later "Thin Ethernet" (Yes, you can mix thick and thin Ethernet without an impedance mismatch, but you may need to use a time domain reflectometer to check. The adapters were built to tolerate TDM pulses.) Hyperchannel, 20Mb/s which required 6U of rack space for the interface. (We had a pair, surplus from another project, but didn't do much with them.) DECNET triaxial cable for connecting things called the DMC-11.
These were all coax, and they were all true "baseband", that is, the signal was meaningful down to DC. No differential signals, and no scrambler to make the number of 1 and 0 bits roughly equal.
You can't use decoupling capacitors or transformers. They were all susceptible to noise and ground loops. The coax shield should only be grounded at one point for the whole chain. Otherwise, noise in the ground comes through as noise in the cable.
All this was no problem in a place full of RF engineers, who knew all that, and considered hooking up a TDR or a scope to a data network normal operational setup. And in an RF R&D facility, where copper busbars an inch wide were run in parallel with electrical ducts to solidly ground out noise, ground was solid.
So coax worked fine at Xerox PARC, it worked fine at Stanford (although inter-building coax didn't work all that well), it worked fine in single-room installations, and it worked fine for organizations which understood the limitations of non-differential baseband over coax.
The coax technology thus needed too much basic electronics knowledge for general office use.
Modern Ethernet is pretty much idiot proof at the electrical level. It's differential signals over a pair, immune to common-mode noise and ground level differences. If you plug standard cables into standard interfaces, it will work.
> Datapoint, a pioneer in office automation using small computers
In 1970, Datapoint created a desktop computer, the Datapoint 2200, with an 8-bit TTL processor. Intel created a microprocessor version of this processor for Datapoint, called the Intel 8008. Datapoint decided to stick with TTL, so Intel ended up selling the 8008 as a general-purpose microprocessor. Intel improved it to make the 8080, then made a 16-bit version, the 8086, as a stopgap product until the iAPX 432 micro-mainframe was ready. The iAPX 432 was a disaster and that's how you ended up with x86.
Ken...I know you tore open an Intel 82586 ethernet chip and an IBM Tropic TR chip. It might be interesting to do a comparison of the complexity of those two, being that they're roughly contemporary.
I wish I had a smart mau but she is standing on the windowsill mau-ing at the part that doesn't open while the other side is wide open. In the rain. Which is getting inside while she maus to get inside.
The last token ring standard appeared in 2001 and there has been a huge amount of network-technology development since then. Tokenring is tiny and incredibly niche. It may as well be dead.
Ethernet got its latest in 2022 and another is in the pipeline.
TokenRing was already an academic curiosity when I was getting my CS degree in the mid-90s. The CS department by that point had already switched to twisted-pair Ethernet. By the time of my first job in the late 90s, we used FDDI for our web farm's backend network, but we tore that out with the arrival of gigabit, so FDDI didn't last too long either.
The "WAS" in that title just made me feel really old. I remember learning about this in college and it being a thing that I would need to work with and understand how it works why it's different than ethernet. And now it's just a big "WAS".
I remember learning about TokenRing in high school circa 2005 for the CompTIA+ certificate.
Never ever seen it in my life though. It was a big "WAS" even then.
The i386-i486 machines we had in middle school were on the Ethernet bus (I remember the BNC cable going along the classroom, with T-joints to the network cards).
IIRC Token Ring wasn't a thing in practice for 100Mbit speeds and beyond, and went the way of the dodo faster than DOS did.
We used to love token ring style networks (specifically ARCNET) for playing Doom, Descent and Quake back in the day. ARCNET was more annoying to set up and had thicker cables, but it was rock-solid reliable afterwards. Totally bulletproof.
In comparison to that, traditional ethernet (think concentric cabling and terminators) glitched often and one flaky part of a cable could ruin your day.
ARCNET was much slower in theory, but robust, fair and stable and did not totally die under load from a single client.
People may forget that Ethernet originally had a shared transmission medium and collisions were a serious limitation. Switching was a later addition that mostly solved collisions and really paved the way for Ethernet as we know it today.
I remember finding an old hub off in a far corner in 2008 working on my school’s network. It was a rare find then!
Hubs were still just barely still relevant when I first started learning networking, but it was late enough that I don't think I've ever encountered one in serious use. Especially after port mirroring became a common feature even on affordable switches. I think we had an old pile of industrial/scientific test equipment in grad school nobody wanted to touch that was using an old Cisco hub, but my memory is fuzzy.
I've definitely never seen any old Thicknet networks in use, though I have seen Token Ring in active use semi-recently. I never learned anything about Token Ring other than I remember old CompTIA mentioning it existed.
I do have a fondness for seeing this old tech that was way out of my reach or just barely too old to encounter back in the day being used, it's so neat to learn about. ClabRetro on YouTube is one of my few "drop everything and watch a new video" creators.
Back in 1999 I was still doing the crawling-under-desks thing. I was at a tobacco companies sales office... and they had a wallplate with ports labeled token ring, ethernet, and appletalk (looked rj11, so phonenet?). A year or two later I worked at their central location in Virginia in a warehouse decommisioning old equipement, got to see some FDDI and HIPPI hardware. Never saw it being used though.
And at my previous job, in a quite normal office, there was a wallplate labeled DEC with the weirdest jack I've ever seen. I couldn't visually identify it, and I thought I knew everything. 1.5" inches wide, with a plastic spring-loaded cover that came down from the top. Maybe only two conductors in it, not normal rj-style pins at all. I'd guess something Vax, but I thought those were always ethernet since the early 80s, and anything older still wouldn't likely have survived until 2025.
And still people use wi-fi...
There's a Minecraft YouTuber called TangoTek who's building a deck building game called Decked Out 3 in Minecraft. That is using a token ring system to control events and messages sent in the game to avoid conflicts [1].
[1] https://www.youtube.com/watch?v=R18APaR7mTQ at 28:54.
Better be careful, or the IBM lawyers will hunt him down for patent infringement. Maybe he should preemptively license it to be on the safe side.
My local hospital system (Premier Health) was all-in on IBM and token ring. I remember being chagrined when they built a new hospital in 1998 and wired everything for token ring. The writing was clearly on the wall for token ring by 1998 but their IT department bled IBM blue.
Fast-forward to 2013, when my wife was giving birth to our daughter in one of their hospitals, and I noticed an unused type-1 token ring wall jack in our room right beside some occupied 8P8C (aka RJ-45) jacks.
BTW there are adapters so you can run Ethernet over Token Ring cabling. We had a lot of them at IBM since all the offices were wired for Token Ring.
I have a couple of D-Link ethernet cards with 9-pin DB9 connectors built in for exactly this purpose.
Token-passing networks were interesting for hard real time system analysis, as they featured deterministic access control instead of collision detection. They made possible extending Rate Monotonic Scheduling theory to the network layer as well. The priority work (priority ceiling protocol, multi level token priority schemes) survive today in token bucket rate limiting.
Interestingly, the CAN bus features deterministic access control through collision detection, using a bus topology rather than a ring topology. I've had bad experiences with CAN, but I believe they're due to hardware bugs and/or driver bugs rather than the underlying design.
Arbitration in CAN is still one of the coolest things I've seen at the hardware layer.
Being able to handle a collision without needing the higher priority message to skip a single beat seemed like magic to me when I first learned about it
the token bus combines the one-user-at-a time of a bus with the potential-token-loss of a ring.
IEEE 802.4 token bus standard was withdrawn
polled buses with a master are pretty common when you don't mind the performance hit and central-point-of-failure. i believe cable networks work this way.
everything can be deterministic until you lose the token.
I worked with Prime minicomputers when I was a late teen. They introduced RingNet, a token ring product, in 1979.
Fun fact: each system had an IN and an OUT coax port, and the coax cable was about as thick as a thumb. If a system died, a small hardware box short circuited, tying the IN and OUT coaxes together. This kept the ring intact, but it would also make that segment of the network longer and there were strict distance limitations between nodes. If the distance got too big, the entire ring broke. Also, if any coax cable got damaged, that also lead to a ring break. Prime had a special diagnostic program they could use on multiple nodes to try to find ring breaks.
Short version:
Token Ring was a networking alternative to Ethernet.
With Ethernet when a node wants to transmit it just does so, then backs off and retries if there was a collision (someone else trying to transmit at the same time).
Token Ring avoided collisions by passing a "permission to transmit" token from node to node in circular (ring) fashion.
Token Ring functions a bit like a ham radio net in my understanding
> and unlike Ethernet, all the cards on the ring had to talk at the same speed.
Essentially that was the same for Ethernet too, everything on the same leg needs to talk at the same speed, though IIRC a different speed device wouldn't take down everything, it would just cause a significant excess of collisions due to the out-of-sync cross-talk and not be able to talk to anything itself. It wasn't until switching hubs and full switches were around that you could mix speeds on the same leg (with a switching hub you'd actually have two legs, one at each speed, bridged, with a full switch you have a separate collision domain per port so can mix speeds quite freely).
When I started working at Network World magazine in the late 1990s Token Ring was still a technology in our coverage area.
It didn't last. Gigabit Ethernet began popping up around the time of the dot-com bubble bursting. That was it for Token Ring.
https://fridayfun.net/dilbert-1996-05-02
This link works better for me: <https://dilbert-viewer.herokuapp.com/1996-05-02>
Ah old Dilbert. Shame the author went crazy.
I just read through his Wikipedia entry and didn't see that he'd gone ''crazy'' unless you mean his political views? He's dead now anyways. I linked to that comic because I had bosses like that way back when.
>I just read through his Wikipedia entry and didn't see that he'd gone ''crazy''
If you want to see how Scott Adams has gone crazy, watch e.g. Behind the Bastards episode(s) on him:
https://www.youtube.com/watch?v=8nyEkHqP65c
I think you mean "went" and I wish there was a very brief plain text summary rather than a long video that I don't have time to watch. Anyway, I enjoyed the token ring comic and don't have strong feelings about the cartoonist now that he's gone.
Oh, flashback to learning queueing theory decades ago!
In principle, token ring was faster than Ethernet (which was CSMA/CD in the day): the mathematics of token ring were exact and analytic, and, when solved, gave higher speeds and better reliability than Ethernet, the mathematics of which were so complex (think three-body-problem) that analytic solutions were available only for bounding equations, which resolved to slower than token ring.
In practice, Ethernet was much faster.
A classic "the model is not the territory" problem.
At a 2600 conference long ago, we built a cluster of public X11 dumb terminals, so hackers at the conference could browse the web and such. We hardened the server against local user attack, and the clients booted from a read only solid state media (aka, floppy disk) with no port access. But how do you harden a physical network against a thousand hackers? Solution: token ring. We made the network so ancient that nobody would have the hardware to hack it that weekend. Worked great.
> Coax connectors for Token Ring did exist, but were more common on Ethernet networks.
I don’t disbelieve the author here but anecdotally the only time I’ve worked with coax BNC plugs for networking is with TR. And it be never seen a TR network in the wild that wasn’t coax.
It’s interesting to read that other cable types existed for TR.
All the tokenring in use at the bank I worked at in the mid-90s was twisted pair.
I faintly recall that some of the older systems used the 9pin connectors.
And the first home ethernet I set up was BNC.
The first time I read about this was about 35 years ago. I read about it in a computer science textbook my father owned. I was just a child so I never thought much about it, except that the name was pretty cool.
That textbook was sort of system textbook which describes a lot of low level stuffs such as networking, hard disks and such.
It was on the GCSE Computer Science curriculum in England until very recently!
IBM were still using them in 2004.
FYI cable networks (upstream) are essentially token ring.
In fact, broadcast ethernet is essentially token ring, except instead of a token it just grabs the wire. Only one machine can grab the wire at a time. Switches hide that from most people.
No, DOCSIS is nothing like token ring. It doesn't use tokens, it uses channels for up/down and TDMA/CDMA.
No, 'broadcast ethernet' is not token ring. There is no token. It's not a ring. Switches do hide the details, but it's hiding collision domains, not token passing.
https://web.archive.org/web/20261016122640/https://dfarq.hom...
YouTuber clabretro has numerous videos installing and configuring token ring:
https://youtu.be/4UWibKEjyY8?is=rpvYv31UIB3DLIep
I love watching this channel as a 20-something who never had a chance to see/touch the hardware he's working with. Great way to show the real-world applications of this tech rather than just reading historical summaries in textbooks.
Some of it is very telling about how close we were to having a completely different tech ecosystem. Have you seen his video on Sun thin clients? They had this tech working back when PCs were $2k a pop. They had this cheap thin client that had all the peripherals and authentication, plus a very rich java runtime and libraries, but due to mismanagement the tech never got off the ground.
IBM POWER is another odd one. They are still going strong because their shit Just Works so anyone doing Serious Business just keeps using them. They have hot pluggable CPU and ram ffs! Compared to cloud computing they are tiny, but they aren't going anywhere anytime soon.
I really did not think I would hear about token ring again
Can't wait for some articles on ATM, X.25, and Frame Relay. :)
Dang, this took me back to the Artisoft LANtastic vs Novell Netware days...
I was something I learned about in college and then never encountered again. Until today.
Related: vampire tap
https://en.wikipedia.org/wiki/Vampire_tap
Summary: Something that coulda been really cool & awesome, if not for crappy decisions made by the Dark Lord...er, I mean IBM.
Lot more details: https://en.wikipedia.org/wiki/Token_Ring
Token Ring was always a bad idea, even before IBM screwed it up. Tanium still does this crap and it's awful.
I find this guy kinda annoying. I mean, yeah...seems like he did some networking back in the day, but everything he posts is just enough off (or ia Google-correct, not Been-There-correct) that I can't quite take him seriously.
The main reason Ethernet won the war was because it was cheaper.
He should have stopped there. That was it. And because it was cheaper, less complicated to build the chips, 'good enough' networking, a bunch of folks jumped on the bandwagon. And here we are.
If you had a 16 megabit network and brought up a system at 4 megabits, it took down the whole network.
Well, yes, everyone who has ever mentioned TR tells some variation of this. And if you left the terminator off of the coax ethernet, you brought the whole network down. But TR got smart MAUs and ethernet got UTP hubs around the same time and problem solved.
And hubs were a lot cheaper than smart MAUs. Sooo...
Ethernet was junk if you went with the cheapest options all around, but you could make it acceptable if you invested some of the savings in improved technology.
Just like TR. If you were deploying dirt cheap 8228s after 1990 or so, your network still sucked. You didn't do that.
But the other reason Ethernet won was because of scale.
Yes, there was a thing called 100Mb Token Ring. Someone might have even shipped some number of them. I never saw one in the wild, and I don't know anyone who claimed they had who didn't work for IBM or Madge (which, btw, wasn't an 'obscure' network company at the time and made more than just TR cards).
That's because basically everyone who did Token Ring (IBM most of all) had decided that you wanted to scale TR you were going to ATM (for a bunch of mostly political and marketing reasons). Which, unlike TR, was in reality a very bad idea, but that's another story.
I've never even heard anyone even suggest 128Mb Token Ring, and I suspect someones LLM is hallucinating. There was a gigabit Token Ring standard (IEEE 802.5v), but I feel pretty confident saying noone ever shipped it. Like I said...ATM was gonna be the future.
Ethernet used a 15-pin connector that looks quite a bit like a PC joystick connector. Token Ring used a 9-pin connector that looks like a 9-pin video connector or an Atari style joystick plug.
Ok...I'll just be snarky and point out there are ethernet cards that use a 9-pin D-sub connector to reuse a TR wiring physical plant. I have several.
Coax connectors for Token Ring did exist
Citation needed. I've seen coax for 802.4 industrial networking stuff, which is not TR. I'm betting more hallucinations.
ARCNET was another competitor from the same timeframe. It, too, was a contender for a while because it was backed by Datapoint, a pioneer in office automation using small computers.
Arcnet was a contender because it was even cheaper than ethernet and it was (and still is) widely used in industrial environments. And some popular early PC file sharing systems (e.g. LANTastic) would use Arcnet.
> Coax connectors for Token Ring did exist
Apollo Domain computers had a token ring which used coax. RCA phono plug connectors. We had a pair of those at the aerospace company for testing. Worked OK, but too weird. We ended up with Sun workstations.
At various times in my early career, I was involved with strange networking hardware only of historical interest now. Apollo Domain (sort of like Unix, but not.) "Thick Ethernet" 10BASE5. Later "Thin Ethernet" (Yes, you can mix thick and thin Ethernet without an impedance mismatch, but you may need to use a time domain reflectometer to check. The adapters were built to tolerate TDM pulses.) Hyperchannel, 20Mb/s which required 6U of rack space for the interface. (We had a pair, surplus from another project, but didn't do much with them.) DECNET triaxial cable for connecting things called the DMC-11.
These were all coax, and they were all true "baseband", that is, the signal was meaningful down to DC. No differential signals, and no scrambler to make the number of 1 and 0 bits roughly equal. You can't use decoupling capacitors or transformers. They were all susceptible to noise and ground loops. The coax shield should only be grounded at one point for the whole chain. Otherwise, noise in the ground comes through as noise in the cable. All this was no problem in a place full of RF engineers, who knew all that, and considered hooking up a TDR or a scope to a data network normal operational setup. And in an RF R&D facility, where copper busbars an inch wide were run in parallel with electrical ducts to solidly ground out noise, ground was solid.
So coax worked fine at Xerox PARC, it worked fine at Stanford (although inter-building coax didn't work all that well), it worked fine in single-room installations, and it worked fine for organizations which understood the limitations of non-differential baseband over coax. The coax technology thus needed too much basic electronics knowledge for general office use.
Modern Ethernet is pretty much idiot proof at the electrical level. It's differential signals over a pair, immune to common-mode noise and ground level differences. If you plug standard cables into standard interfaces, it will work.
Which is why coax Ethernet went away.
> Datapoint, a pioneer in office automation using small computers
In 1970, Datapoint created a desktop computer, the Datapoint 2200, with an 8-bit TTL processor. Intel created a microprocessor version of this processor for Datapoint, called the Intel 8008. Datapoint decided to stick with TTL, so Intel ended up selling the 8008 as a general-purpose microprocessor. Intel improved it to make the 8080, then made a 16-bit version, the 8086, as a stopgap product until the iAPX 432 micro-mainframe was ready. The iAPX 432 was a disaster and that's how you ended up with x86.
Ken...I know you tore open an Intel 82586 ethernet chip and an IBM Tropic TR chip. It might be interesting to do a comparison of the complexity of those two, being that they're roughly contemporary.
Yeah, when I saw 'Datapoint' I almost went there too. :-)
> But TR got smart MAUs
I wish I had a smart mau but she is standing on the windowsill mau-ing at the part that doesn't open while the other side is wide open. In the rain. Which is getting inside while she maus to get inside.
Maybe she's configured for 4Mb and the other side is 16Mb. Check the bridge between the lobes and make sure it's passing...er...traffic. :-)
Why is the title written in the past tense? ARC156 is still being used in 2026, Automated Logic’s WebCTRL BAS system uses it for communication.
https://www.automatedlogic.com/en/media/AAR_CS-aug2023_tcm70...
The last token ring standard appeared in 2001 and there has been a huge amount of network-technology development since then. Tokenring is tiny and incredibly niche. It may as well be dead.
Ethernet got its latest in 2022 and another is in the pipeline.