First time hitting the front page. Definitely made my day as a long time lurker!
When I look at the reindustrialization efforts, the bottleneck keeps showing up in the machines themselves (and the machines that make those machines). The question then shifts from “we need more factories” or "we need robots that run the factories", to the capex, precision components, process knowledge, and industrial base that make modern manufacturing possible.
Curious what people see as the highest-leverage places to tackle.
Extremely illuminating in the same context as your piece.
I am not particularly moved by arguments against globalization but giving away our tool and die + heavy industry base load now seems like a huge loss, and I'm not sure how you rebuild an advanced manufacturing base without first rebuilding that.
Maybe there's a way to skip some generations of development and volume here, and I'd love to read more about it.
>Curious what people see as the highest-leverage places to tackle.
Economies of scale obviously
Until we figure out how to scale economically China will continuously undercut every disorganized effort we come up with, whether it's robots, AI, energy, EVs, rare earth minerals
It's the same story every time. We make a small twitch, they set up a small government office (it was only 2 people for REMs) that helps organize the entire industry into one unified movement. It's poor governance, simple as that
Interesting you say that. I think it's a bit deeper than just poor governance. I think the system itself doesn't lend well to longer-term planning and execution.
Auckland, New Zealand's mayor recently got into a bit of controversy for saying “Democracy’s had its day. It’s time for something else, really”
I don't know about other countries, but in NZ we have had many projects stop-start-stop etc, being stuck in endless planning cycles etc, because the election cycle is every three years, and people will end up voting a government out partly because they haven't seen any progress from the current government. Enter the next govt, and the things that were being planned will be canned.
Not suggesting the CCP model should be adopted. But I do think there needs to be a rethink on how long-term projects and infra can be supported without being affected by short election cycles.
The US is bad on educating and hiring machine shop as well as other factory workers. Industrial workers aren't culturally respected, don't make a good living until they're quite experienced and don't have job security until then. Long, split shifts are standard here along with high intensity work. But that makes these jobs less desirable than a similarly paid less intensive job and thus make them just not desirable. All the efforts to change this stuff are piecemeal or involve importing workers.
The US also doesn't educate regular engineers anymore or emphasize hands-on results with the engineers. And, well, look at how Boeing treated it's highly skilled workforce in Washington. If policy makers cared about this sh*t, they'd push back on maneuvers like that.
It is crazy how rather down to earth and low tech some of the machine and machine tool manufacturers operate.
We did a data analytics project for a company that builds strand press tools for manufacturers world wide. It is basically about understanding the impact of material, temperature, etc on the production process and looping back precision metrology.
Interesting thing is that they did not even test the tools but rather improve based on feedback from the their customers thousands of kilometers away.
It a lot about controlling the process and people's experience over years. A lot of Germany's 'hidden champions' are specialized precision machine and machine tool manufacturers. Unfortunately for Germany particularly China is catching up in terms of controling the whole value chain...
I am old so I grew up with the panic that the USA does not make the most steel anymore. At the time I thought: wow: we're probably way behind in brick and concrete too.
We still manufacture the most rockets, the most satellites, the most jets, the most missiles etc. I think it is easier to relearn or reinvent the machines that build the machines. Being cutting edge is hard. Tesla essentially had to go back to assembly lines, a technique everyone said Americans can't do anymore and they invented new ways of assembling autos (I'm think building in pieces, not off the frame) that many companies imitated.
A notable milestone was the heavy press program --- but research where Tesla bought its Gigapress and where the now largest/heaviest was recently brought online.
I like this perspective. I think right now there's a lot of exuberance of reindustrializing _everything_ but perhaps the highest ROI is to focus on what America does best, vs. trying to reinvent everything as if we're an island of our own.
It seems like part of the tension is between the question of what has the highest financial ROI vs the idea of manufacturing self-sufficiency being seen as important from a geopolitical standpoint.
Your example kinda belies your thesis. Tesla is producing a substantially worse product than its Chinese competitors and surviving only thanks to protectionism.
Can America build the precision machine parts needed to manufacture useful robots ?
Browsing Michelle Suns other articles gives a great insight into how un-viable it is for American manufacturing to catch up with Chinese manufacturing.
There are pretty massive benefits of scale / density in Shenzen to support every aspect of manufacturing, which are similar to the benefits of VC funding scale in Silicon Valley.
Its hard to reproduce either ecosystem, and impossible to do it quickly.
Even if we use a self-improvement loop that uses AI to train industrial robots to run machine tools, thats going to take some time - maybe more than a decade, even if we hit AGI / ASI in the next 5 years.
and the race to AGI / ASI is already being throttled by compute, which is being limited by the rate at which we can build datacenters and get power sources for them - some GPUs are sitting in warehouses, they might even lose half their value before they get installed.
Perhaps a better outcome for everyone is a detente, a re-invigoration of the free trade cooperation/competition that gave us this incredible growth and prosperity the past 40 years, with its intimately co-mingled supply chains ?
Its probable that engineers in Shenzen can innovate faster in using AI to run robots to run machine tools to manufacture machine tools and parts for robots, than America can. Their AI chips and LLM models are good enough, only getting better.
I guess the counter-argument would be the rapid innovation of SpaceX engines and catching both starship stages and the scaling up of Tesla car and robot production.
Not to mention the very successful Artemis Moon loop mission - clearly America _can_ innovate in manufacturing / physical tech.
China is the counter argument to China. Their rise was improbable and hard won but it proves that you can overcome an unimaginable lead if you really care.
On incredibly short timescales — we're talking less than 25 years, really, for the major part of the ramp. You could argue "2000-2010" with a straight face. It's 'just' will & well-regulated markets.
exactly re your last point. While there's a lot of opportunities to optimize factories with AI, Shenzhen factories can do the same with agents and cheaper LLMs.
My guess is that the US (and western countries) can likely build a decent supply base for price-insensitive verticals like defense, through a mix of venture capital support and govt budget. And it's still worth doing for AI / physical AI sovereignty.
11 months ago, it was only Steve Yegge. now, thanks to the power of software and factories, it could be just about anybody but if i see them i'll tell them you're interested in seeing a prospectus
This feels more like a surface level googling about who assembles the machines. If your castings, precision ball-screws, ways, and controls are being imported, then your import policy needs to take that into consideration or you won't get far.
First time hitting the front page. Definitely made my day as a long time lurker!
When I look at the reindustrialization efforts, the bottleneck keeps showing up in the machines themselves (and the machines that make those machines). The question then shifts from “we need more factories” or "we need robots that run the factories", to the capex, precision components, process knowledge, and industrial base that make modern manufacturing possible.
Curious what people see as the highest-leverage places to tackle.
Great piece! Immediately became a subscriber.
I especially loved Destin Sandlin's attempt at making a simple grill scrubber in America: https://www.youtube.com/watch?v=3ZTGwcHQfLY
Extremely illuminating in the same context as your piece.
I am not particularly moved by arguments against globalization but giving away our tool and die + heavy industry base load now seems like a huge loss, and I'm not sure how you rebuild an advanced manufacturing base without first rebuilding that.
Maybe there's a way to skip some generations of development and volume here, and I'd love to read more about it.
>Curious what people see as the highest-leverage places to tackle.
Economies of scale obviously
Until we figure out how to scale economically China will continuously undercut every disorganized effort we come up with, whether it's robots, AI, energy, EVs, rare earth minerals
It's the same story every time. We make a small twitch, they set up a small government office (it was only 2 people for REMs) that helps organize the entire industry into one unified movement. It's poor governance, simple as that
> It's poor governance, simple as that
Interesting you say that. I think it's a bit deeper than just poor governance. I think the system itself doesn't lend well to longer-term planning and execution.
Auckland, New Zealand's mayor recently got into a bit of controversy for saying “Democracy’s had its day. It’s time for something else, really”
I don't know about other countries, but in NZ we have had many projects stop-start-stop etc, being stuck in endless planning cycles etc, because the election cycle is every three years, and people will end up voting a government out partly because they haven't seen any progress from the current government. Enter the next govt, and the things that were being planned will be canned.
Not suggesting the CCP model should be adopted. But I do think there needs to be a rethink on how long-term projects and infra can be supported without being affected by short election cycles.
I'd say it's people.
The US is bad on educating and hiring machine shop as well as other factory workers. Industrial workers aren't culturally respected, don't make a good living until they're quite experienced and don't have job security until then. Long, split shifts are standard here along with high intensity work. But that makes these jobs less desirable than a similarly paid less intensive job and thus make them just not desirable. All the efforts to change this stuff are piecemeal or involve importing workers.
The US also doesn't educate regular engineers anymore or emphasize hands-on results with the engineers. And, well, look at how Boeing treated it's highly skilled workforce in Washington. If policy makers cared about this sh*t, they'd push back on maneuvers like that.
It is crazy how rather down to earth and low tech some of the machine and machine tool manufacturers operate.
We did a data analytics project for a company that builds strand press tools for manufacturers world wide. It is basically about understanding the impact of material, temperature, etc on the production process and looping back precision metrology.
Interesting thing is that they did not even test the tools but rather improve based on feedback from the their customers thousands of kilometers away.
It a lot about controlling the process and people's experience over years. A lot of Germany's 'hidden champions' are specialized precision machine and machine tool manufacturers. Unfortunately for Germany particularly China is catching up in terms of controling the whole value chain...
Very interesting subject and data but seems 100% AI generated
I am old so I grew up with the panic that the USA does not make the most steel anymore. At the time I thought: wow: we're probably way behind in brick and concrete too.
We still manufacture the most rockets, the most satellites, the most jets, the most missiles etc. I think it is easier to relearn or reinvent the machines that build the machines. Being cutting edge is hard. Tesla essentially had to go back to assembly lines, a technique everyone said Americans can't do anymore and they invented new ways of assembling autos (I'm think building in pieces, not off the frame) that many companies imitated.
A notable milestone was the heavy press program --- but research where Tesla bought its Gigapress and where the now largest/heaviest was recently brought online.
I like this perspective. I think right now there's a lot of exuberance of reindustrializing _everything_ but perhaps the highest ROI is to focus on what America does best, vs. trying to reinvent everything as if we're an island of our own.
It seems like part of the tension is between the question of what has the highest financial ROI vs the idea of manufacturing self-sufficiency being seen as important from a geopolitical standpoint.
Your example kinda belies your thesis. Tesla is producing a substantially worse product than its Chinese competitors and surviving only thanks to protectionism.
Can America build the precision machine parts needed to manufacture useful robots ?
Browsing Michelle Suns other articles gives a great insight into how un-viable it is for American manufacturing to catch up with Chinese manufacturing.
There are pretty massive benefits of scale / density in Shenzen to support every aspect of manufacturing, which are similar to the benefits of VC funding scale in Silicon Valley.
Its hard to reproduce either ecosystem, and impossible to do it quickly.
Even if we use a self-improvement loop that uses AI to train industrial robots to run machine tools, thats going to take some time - maybe more than a decade, even if we hit AGI / ASI in the next 5 years.
and the race to AGI / ASI is already being throttled by compute, which is being limited by the rate at which we can build datacenters and get power sources for them - some GPUs are sitting in warehouses, they might even lose half their value before they get installed.
Perhaps a better outcome for everyone is a detente, a re-invigoration of the free trade cooperation/competition that gave us this incredible growth and prosperity the past 40 years, with its intimately co-mingled supply chains ?
Its probable that engineers in Shenzen can innovate faster in using AI to run robots to run machine tools to manufacture machine tools and parts for robots, than America can. Their AI chips and LLM models are good enough, only getting better.
I guess the counter-argument would be the rapid innovation of SpaceX engines and catching both starship stages and the scaling up of Tesla car and robot production.
Not to mention the very successful Artemis Moon loop mission - clearly America _can_ innovate in manufacturing / physical tech.
China is the counter argument to China. Their rise was improbable and hard won but it proves that you can overcome an unimaginable lead if you really care.
On incredibly short timescales — we're talking less than 25 years, really, for the major part of the ramp. You could argue "2000-2010" with a straight face. It's 'just' will & well-regulated markets.
Kinda? The high failure rate of both of those is not a great testament to success though.
exactly re your last point. While there's a lot of opportunities to optimize factories with AI, Shenzhen factories can do the same with agents and cheaper LLMs.
My guess is that the US (and western countries) can likely build a decent supply base for price-insensitive verticals like defense, through a mix of venture capital support and govt budget. And it's still worth doing for AI / physical AI sovereignty.
ASML.
Best article to understand what ASML is all about - https://worksinprogress.co/issue/the-worlds-most-complex-mac...
11 months ago, it was only Steve Yegge. now, thanks to the power of software and factories, it could be just about anybody but if i see them i'll tell them you're interested in seeing a prospectus
AI Slop?
This feels more like a surface level googling about who assembles the machines. If your castings, precision ball-screws, ways, and controls are being imported, then your import policy needs to take that into consideration or you won't get far.
That wasn't my impression .. and the author has many articles on related subjects that seem to be her own opinions.
It might be hard to model this domain well, but she seems to be discussing it rationally, diving into the details.
thanks @jgord!
@showerst the research is ai-assisted, the writing is not perfect but hopefully not slop :')
my hope is to invite discourse from more parties to think through this important topic for US industrial future